AC2000 Double-Tank Air Cart

Request a Quote

Are you interested in a quote or demonstration of the AC2000?  Please fill out the form below and one of our Territory Managers will be in touch shortly.

AC2000 Double-Tank Air Cart

Salford air carts feature poly tanks with stainless steel metering systems for fast, easy cleanout and the ability to hold seed or fertilizer without degradation of the tank.

The AC2000 is a double-tank, tow-between, or tow-behind model. The AC2000 can be equipped with a 65-bushel Salford Plus tank to handle small seed and inoculants. The AC2000 comes standard with a 17" REM® fan and a Zero Max® infinitely adjustable ground drive.

Salford's stainless steel meters use a poly peg roller for accurate metering of almost any commodity at virtually any rate.  Individual metering compartments ensure that the same amount of product is delivered to each run for highly accurate application rates.

Cover Crops

Salford air carts are designed to accurately deliver seed and fertilizer at a wide range of seeding rates. Multi-bin air carts are able to meter seed and fertilizer at separate rates and optional double shoot kits allow these carts to be delivered separately as well. Salford air carts are routinely used for variable rate fertilizer blending, adding cover crops to the mix is additional value with each pass.

AC2000 DOUBLE-TANK AIR CART
AC2000 DOUBLE-TANK AIR CART
AC2000 DOUBLE-TANK AIR CART
AC2000 DOUBLE-TANK AIR CART


GENERAL MODEL INFORMATION

  • AVAILABLE WITH DUAL 140 BU AND 180 BU POLYMER TANKS*
  • STAINLESS STEEL INNER TANK COMPONENTS, AIR LINES AND METERING SYSTEM
  • GROUND DRIVE OR HYDRAULIC VARIABLE RATE 10-OUTLET METERING (DOES NOT INCLUDE 2 1/2" AIR LINES TO TOOLBAR) WITH PLASTIC PEGGED ROLLERS
  • 17" S3 HYDRAULIC FAN (REQUIRES 21 GPM @ 3000 PSI) WITH AIR MANIFOLD DAMPER 
  • DOUBLE SHOOT WITH AIR STREAM SWITCH BOX ON REAR TANK
  • REAR HYDRAULIC 3-POINT HITCH WITH 12,000 LBS LIFT CAPACITY** (18 INCHES FROM LIFT EYE) ON AC2280 TOW-BETWEEN MODEL ONLY
  • 3 SETS OF 1/2" HYDRAULIC LINES TO REAR 3-POINT HITCH FOR TOOLBAR
  • DRAWBAR ADAPTOR AVAILABLE FOR 3-POINT HITCH FROM DRAWN IMPLEMENTS***
  • MOUNTED LOADING AUGER
  • STANDARD 710/70R42 TRACTOR LUG TIRES ON 10-BOLT HUBS (TIRE DEDUCT AVAILABLE) 22.5 X 16.1 TIRES STANDARD ON TOW-BEHIND FRONT AXLE
  • ASSEMBLED AS TRUCKING WIDTH PERMITS
  • Bushel capacity is calculated by volume; actual capacity may vary by commodity type

** Total lift capacity diminishes as the implement center of gravity moves further from the hitch.  Lift capacity is also determined by the the cart and the remaining carrying capacity of of the tires installed.  Front ballast weights may be required to avoid negative tongue weight and safelyoperate 3-point hitch tools.  Front ballast weights are needed when the implement weigth is over 3,900 lbs or beyond 18" from the lift-eyes.

***Trailing implement horsepower requirement should not exceed 500 hp.

IDEAL FOR NUTRIENT APPLICATION - APPLY RIGHT NUTRIENTS AT RIGHT RATE, RIGHT PLACE AND RIGHT TIME.

ELECTRONICS PACKAGES

  • DICKEY-JOHN INTELLI-AG CONTROL SYSTEM WITH CAB CONSOLE
    • 12" Dickey-John Console
    • Fan speed sensor
    • Bin level and pressure sensors
    • Meter shaft speed encoder
    • On-board ECU
    • Harness to cart hitch
  • DICKEY-JOHN INTELLI-AG ISObus CONTROLS FOR HYD VR
    • Compatibility with ISObus 11783 certified consoles* (i.e. JD 2630, CaseIH Pro700, Trimble TMX 2050, etc.)
    • Fan speed sensor
    • Bin level and pressure sensors
    • Meter shaft speed encoder
    • On-board ECU
    • Harness to hitch
    • Virtual Terminal NOT included

ADDITIONAL TOW-BEHIND DRILL HARNESS

  • DIGI-STAR SCALE KIT
    • complete scales and harnesses for dual compartments
    • cab-mounted scale readout for each compartment
  • DIGI-STAR SCALE-LINK ISObus SCALE KIT
    • complete scales and harnesses for dual compartments
    • harness to connect into ISObus certified consoles*

*ISObus compliance does not guarantee compatibility with all functionality on 3rd party ISObus displays; Non-ISObus displays are not compatible with this controller. Always consult with the display manufacturer before purchase - Prescription mapping and/or auto section control may require software unlock. Ensure latest display firmware version is installed.

AVAILABLE MODELS

  • AC2280 TBT 3PT - 280 BUSHEL (140 + 140) TOW-BETWEEN POLY TANK CART WITH GROUND DRIVE METERING
    • 10-outlet Ground Driven Metering System w/ZeroMax infinite ratio gearbox
    • 2 x 140 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • Rear 3-point hitch assembly w/implement hydraulics
    • 8" x 18' hydraulic loading auger on manual swing arm
    • 710/70R42 Tires on 10-bolt rims
  • AC2280 TBT 3PT - 280 BUSHEL (140 + 140) TOW-BETWEEN POLY TANK CART WITH HYDRAULIC VARIABLE RATE METERING
    • 10-outlet Ground Driven Metering System w/Dickey-John Hydra-Drives
    • 2 x 140 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • 8" x 18' hydraulic loading auger on manual swing arm
    • 710/70R42 Rear Tires on 10-bolt rims; 22.5 x 16.1 Front Tires
  • AC2280 TBH - 280 BUSHEL (140 + 140) TOW-BEHIND POLY TANK CART WITH HYDRAULIC VARIABLE RATE METERING
    • 10-outlet Ground Driven Metering System w/Dickey-John Hydra-Drives
    • 2 x 140 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • 8" x 18' hydraulic loading auger on manual swing arm
    • 710/70R42 Rear Tires on 10-bolt rims; 22.5 x 16.1 Front Tires
  • AC2360 TBT - 360 BUSHEL (180 + 180) TOW-BETWEEN POLY TANK CART WITH GROUND DRIVE METERING
    • 10-outlet Ground Driven Metering System w/ZeroMax infinite ratio gearbox
    • 2 x 180 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • Rear drawbar assembly for trailing implements
    • 8" x 20' hydraulic loading auger on manual swing arm
    • 710/70R42 Tires on 10-bolt rims
  • AC2360 TBT - 360 BUSHEL (180 + 180) TOW-BETWEEN POLY TANK CART WITH HYDRAULIC VARIABLE RATE METERING
    • 10-outlet Ground Driven Metering System w/Dickey-John Hydra-Drives
    • 2 x 180 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • 8" x 20' hydraulic loading auger on manual swing arm
    • 710/70R42 Tires on 10-bolt rims
  • AC2360 TBH - 360 BUSHEL (180 + 180) TOW-BEHIND POLY TANK CART WITH GROUND DRIVE METERING
    • 10-outlet Ground Driven Metering System w/ZeroMax infinite ratio gearbox
    • 2 x 180 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • 8" x 18' hydraulic loading auger on manual swing arm
    • 710/70R42 Rear Tires on 10-bolt rims; 22.5 x 16.1 Front Tires
  • AC2360 TBH - 360 BUSHEL (180 + 180) TOW-BEHIND POLY TANK CART WITH HYDRAULIC VARIABLE RATE METERING
    • 10-outlet Ground Driven Metering System w/Dickey-John Hydra-Drives
    • 2x 180 bushel poly tanks with stainless internal components
    • 17" S3 hydraulic fan (Requires 17 GPM @ 3000 psi)
    • 10" x 24' hydraulic loading auger on hydraulic remote control swing arm
    • 710/70R42 Rear Tires on 10-bolt rims; 22.5 x 16.1 Front Tires

OTHER OPTIONS

  • DRAWBAR HITCH ADAPTOR FOR 3-POINT HITCH
  • UPGRADE TO CAT 4 DRAWBAR HITCH
  • REAR TIRE AND RIM DEDUCT
  • 8" AUGER DEDUCT
  • 10" AUGER DEDUCT
  • LOW OUTPUT PLASTIC PEGGED METER ROLL IN LIEU OF STANDARD
  • HIGH OUTPUT STAINLESS STEEL METER ROLL IN LIEU OF STANDARD

ADDITIONAL INFORMATION

  • TRANSPORT WIDTH
  • TRANSPORT HEIGHT (140 + 140)
  • TRANSPORT HEIGHT (180 + 180)