Progressive Solutions for Nutrient Management Regulations

Farmers Are Up To the Challenge

Nutrient Management is being pushed to the forefront of farming as science and government are making direct links between fertilizer and manure application and urban water quality. Farmer’s tendency to land stewardship and their progressive nature is allowing the agricultural industry to face these nutrient management challenges with many solutions.
Chesapeake Bay is the one of the most famous modern examples of government setting restrictions on farmer’s nutrient application practices. However, stories like that of Toledo, Ohio’s drinking water shut downs; or the Des Moines Iowa Water Works suing 10 area watersheds over the city’s drinking water quality, point out that the problem affects everyone.
Jurisdictions across North America are looking for solutions on how to minimize the effect agriculture has on water quality. In July 2015 Ohio’s Western Lake Erie Basin district started placing tighter restrictions on fertilizer and manure application practices. These restrictions are granted exemption if the nutrients are either injected into the ground, incorporated into the soil within 24 hours of application or if the nutrients are applied onto a growing crop.

Two Solutions for Every Regulation

It seems that for every regulation the agricultural industry is offering several solutions.
Variable rate fertilizer application and section control system are becoming widely adopted options to cut down on application rates and avoid run off from over application. Precision control systems are becoming more common on farms today and the primary reason for switching to variable rate application is the potential cost savings from cutting application rates and focusing fertilizer application where the crops are most likely to use it.
Application equipment that is ISOBUS compatible allows one terminal move between the tractors and control various implements. Although ISOBUS isn’t fool proof compatibility, depending on firmware versions and terminal “unlocks”, the fact remains that using one control terminal across multiple implements is the best way to maximize the farm’s investment in precision controls. In season fertilizer application meets several best management practices and its being adopted by more producers all the time. Farmers are applying manure over established crops to hold the nutrients for the rest of the season or spoon feeding crops with commercial fertilizer through the season to reduce application rates and costs. At the same time they are maximizing the effect of the fertilizer by applying when the plant can best use the nutrients.
Salford’s BBI Sniper spinner spreader represents a step forward for in-season granular fertilizer application by offering an industry leading 120 foot spread pattern and the option for 12 section control to help eliminate over applying fertilizer or spreading into sensitive areas such as buffer strips or waterways. Salford’s new Valmar 8700 is an air boom applicator that can be equipped with drop tubes on 30 inch centers to apply dry fertilizer between the rows of standing crops. The 8700 can be equipped with section control to automatically turn on and off the left or right side air boom for the most economical and ecological application possible. Both the Sniper and the 8700 can be ordered ISOBUS compatible. Side dress operations and strip-till are other methods of focusing fertilizer below the ground and possibly into standing commercial crops. Salford’s PathFinder is a self-steering fertilizer delivery cart that uses proven Valmar Airflo technology to gently, accurately, meter seed or fertilizer. The PathFinder ST-10 has 4 ton and 6 ton tanks that feed a central metering bank. The ST-10 is capable of accurately mixing 2 products at the meter and varying the application rate. The metering system has 4 section control and has up to 24 outlets to supply fertilizer, and minimize over application on planters and strip-till bars.

One of the Hottest Topics in Nutrient Management Today is Cover Crops.

In order for farmers to take an interest in cover crops they have to fit in the commercial operation of the farm. That may mean that ground cover is regulated in highly erodible soil, subsidies make the crop a profit center for the farm or the value of the cover crop as feed and/or green manure is justifiable to the operation.
Regardless of the specific reason farmers are choosing to put down cover crops, the fact remains that it’s a crop that requires time, equipment and management on the farm. The most common way to get cover crops on is with existing seed drills. However, when time is of the essence seeders that attach to high speed tillage machines are becoming a more popular option. Salford’s dry application products, come in a range of sizes, pull-type or 3 point mount, meter accurately at any speed, compared to electric drive options available today, and can be made to fit with virtually any brand of tillage implement. Salford’s Independent Series vertical tillage machines, and Salford’s AerWay aeration product line, are widely accepted for low disturbance manure incorporation and can be paired with the Valmar cover crop seeders to get more done with each pass. To see more progressive solutions for fertilizer application or tillage in highly erodible ground go to salfordgroup.com or call 1-866-442-1293.

Salford Launches New Row Crop Air Boom Available for Select Salford Applicators

Salford Launches New Row Crop Air Boom Available for Select Salford Applicators

New for 2018 - On the heels of launching the Salford-Valmar 6700 Mounted Air Boom Applicator, Salford Group is releasing a row crop air boom for the new 8700 Pull-Type Air Boom Applicator. Both the 6700 and 8700, along with the newly released Ferti-GO 4S, will be on display at the National Farm Machinery Show in Louisville, Kentucky, February 14 – 17, 2018.

Read More

Salford Launches the First Aftermarket Mounted Air Boom Applicator for John Deere® Chassis

Salford Launches the First Aftermarket Mounted Air Boom Applicator for John Deere® Chassis

New for 2018, Salford Group is releasing the Salford-Valmar 6700, the world's only aftermarket chassis mounted air boom applicator. The 6700 will bring producers, custom applicators and ag retailers alike to new heights with dry fertilizer air boom applicators, mounted on high clearance sprayer chassis.

Read More

Salford Launches New Range of Precision Granular Applicators for Cover Crop & Fertilizer Application

Salford Launches New Range of Precision Granular Applicators for Cover Crop & Fertilizer Application

Salford-Valmar is introducing the 56 series, a new line of granular applicators to replace its successful, long-running 55 series line. This new line features new polyethylene hoppers, a new ISOBUS controller and the ability to control up to 4 separate metering sections. Also being introduced at Farm Progress, will be Salford-Valmar’s 6-ton PathFinder steerable cart, to be paired with the ST6.

Read More

Salford Launches Largest Pull-Type Pneumatic Boom Applicator

Salford’s Valmar 9620, the world’s largest capacity pull-type pneumatic boom applicator, is now in full production. The newest addition to Salford’s Valmar Air Boom product line is available from Salford’s Valmar dealers. Salford acquired Valmar in May, 2015.

“Salford’s Valmar Air Boom line has earned a reputation for being accurate, reliable and technologically sound. By adding precision technology and targeted application to this existing technology, we’ve created a product which allows producers to see a direct return on investment,” said Salford’s Valmar Customer Service Manager, Jason Janzen.

Read More

Salford Group Broadens its Product Portfolio Targeting Ag Retailers

Salford Group Broadens its Product Portfolio Targeting Ag Retailers

Salford Group, a leading manufacturer of innovative tillage, seeding and fertilizer equipment is launching a series of application tools aimed specifically at ag retailers in North America.

Read More