Endurance Spreader

Application • Pull Type Spinner Spreaders

Features

Salford’s Endurance is the definition of excellence among litter spreaders on the market today. This pull-type spreader provides precision in targeted delivery of organic nutrients and is ideal for poultry litter, manure, shavings and a variety of other organic materials. The Endurance is a tough, durable spreader that achieves targeted application with a uniform spread pattern. Powered by hydraulics and a spinner system that achieves a wide spread pattern, this pull-type unit is available in lengths ranging from 16’–24’ and made to get the job done when it comes to spreading a range from light to heavy materials on farms of all sizes.

• Hydraulic Binary Manifold with pilot operated relief, manual flow controls for spinner and conveyor,
conveyor dump valve
• Heavy-duty 2-section hydraulic pump (on-self contained hydraulic units)
• 35-gallon hydraulic reservoir with fill, sight window, temp gauge, drain and vent
• Proprietary 2 1/2″ spinner motors (provides optimal pressure seal protection)
• Tandem conveyor drive gearbox
• 6 x 1/4″ spinner fins per spinner
• 10-gauge hopper with 7-gauge rails, 45-degree hopper sides, sight window
• Hopper-on-frame construction (bolt-down)
• Dual rack-and-pinion gate (prevents jamming)
• 34″ conveyor with 88K heavy-duty chain, bars every other link (close bar)

Ideal for livestock and poultry farmers or custom applicators, the BBI Endurance will spread a variety of materials.

Chicken litter
Turkey litter
Beet lime
Lime
Bark
Wood chips
Shavings
Pelletized material

STANDARD PROFILE HOPPER has a capacity of 20 cu/ft. struck level per linear foot, at 88 in. wide and 51.5 in. high

WIDE HOPPER has a capacity of 21 cu/ft. struck level per linear foot, at 96 in. wide and 52 in. high.

Option rich Endurance model offers Torsion Axle or Walking Beam suspension types available for a variety of tire sizes and hopper construction choices.

Now more than ever, the Endurance gives you greater return on investment through more choice on the farm, with heave duty lime packages available. Greater versatility for greater economic performance, season to season.

Close bar conveyor chain (Bars every other link)

Center-V

Single Tandem Gear Case

HIGH PERFORMANCE LIME SPREADER PACKAGE

3rd run 88k conveyor chain

Over-slung center-V

Poly Floor UHMW

2 Tandem gear cases

Walking beam suspension

Contact Us Form

"*" indicates required fields

Need some tech support?
Find your equipment's Manual here. Check out the How-To Videos page for tips and tricks on operating and maintaining your Salford equipment, and explore our How-To Blog posts for even more helpful resources.

First Name * Last Name *

Phone Number*

Email*

State/Provice*

Postal code*

How can we help you?*

Salford Model Line*

Serial Number

Message to Salford

Name

This field is for validation purposes and should be left unchanged.

Specs Compare

Product Specs

Series	BBI	BBI	BBI	BBI
Product type	Pull Type Spinner Spreaders	Pull Type Spinner Spreaders	Pull Type Spinner Spreaders	Pull Type Spinner Spreaders
Model	Endurance 16 ft	Endurance 18-ft	Endurance 20-ft	Endurance 24-ft
Size	16 ft (4.88 m)	18 ft (5.49 m)	20 ft (6.10 m)	24 ft (7.32 m)

Dimensions and Weights

Materials Spread

Fertilizer	NO	NO	NO	NO
AG Lime	YES	YES	YES	YES
Litter	YES	YES	YES	YES
Organics	YES	YES	YES	YES
Seed	NO	NO	NO	NO
Other	Chick Litter and Composted Manure	Chick Litter and Composted Manure	Chick Litter and Composted Manure	Chick Litter and Composted Manure
Number of products applied, including optional hopper compartments	1	1	1	1

Hopper

Hopper Size	16 ft (4.27 m) Standard Hopper 304 cu-ft (88″ wide x 51.5″ high) 16 ft (4.27 m) Wide Profile Hopper 400 cu-ft (96″ wide x 52″ high)	18 ft (5.49 m) Standard Hopper 342 cu-ft (88″ wide x 51.5″ high) 18 ft (5.49 m) Wide Profile Hopper 450 cu-ft (96″ wide x 52″ high)	20 ft (6.10 m) Standard Hopper 380 cu-ft (88″ wide x 51.5″ high) 20 ft (6.10 m) Wide Profile Hopper 500 cu-ft (96″ wide x 52″ high)	24 ft (7.32 m) Standard Hopper 456 cu-ft (88″ wide x 51.5″ high) 24 ft (7.32 m) Wide Profile Hopper 550 cu-ft (96″ wide x 52″ high)
Hopper Material	Standard: 10 Gauge Hopper with 7-Gauge Rails & Floors Optional: 7 Gauge Carbon Steel Hopper with 1/4″ Rails & Floors Standard: Steel Floor Optional: Poly Floor	Standard: 10 Gauge Hopper with 7-Gauge Rails & Floors Optional: 7 Gauge Carbon Steel Hopper with 1/4″ Rails & Floors Standard: Steel Floor Optional: Poly Floor	Standard: 10 Gauge Hopper with 7-Gauge Rails & Floors Optional: 7 Gauge Carbon Steel Hopper with 1/4″ Rails & Floors Standard: Steel Floor Optional: Poly Floor	Standard: 10 Gauge Hopper with 7-Gauge Rails & Floors Optional: 7 Gauge Carbon Steel Hopper with 1/4″ Rails & Floors Standard: Steel Floor Optional: Poly Floor
Hopper Extensions	Standard: Hopper with no Extension Brackets Optional: Extension Brackets for 6 inch boards	Standard: Hopper with no Extension Brackets Optional: Extension Brackets for 6 inch boards	Standard: Hopper with no Extension Brackets Optional: Extension Brackets for 6 inch boards	Standard: Hopper with no Extension Brackets Optional: Extension Brackets for 6 inch boards
Hopper Gate Control	Dual rack-and-pinion gate (prevents jamming) Standard: Manual Operated Gate	Dual rack-and-pinion gate (prevents jamming) Standard: Manual Operated Gate	Dual rack-and-pinion gate (prevents jamming) Standard: Manual Operated Gate	Dual rack-and-pinion gate (prevents jamming) Standard: Manual Operated Gate
Hopper Ladder	Standard: Hopper Ladder	Standard: Hopper Ladder	Standard: Hopper Ladder	Standard: Hopper Ladder
Hopper "Inverted V"	Standard: No Inverted “V” Optional: Overslung Inverted “V” Removeable * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper.	Standard: No Inverted “V” Optional: Overslung Inverted “V” Removeable * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper.	Standard: No Inverted “V” Optional: Overslung Inverted “V” Removeable * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper.	Standard: No Invertered V Optional: Removeable Invertered V * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper.
Hopper Sight Window	Yes	Yes	Yes	Yes

Metering and Drive

PTO Drive	Choice: 540 RPM Series 6 CV Joint PTO Shaft STANDARD 1000 RPM Series 6 CV 1 3/4 20 Spline STANDARD 1000 RPM Series 6 CV 1 3/8 21 Spline STANDARD No PTO – Plug to Tractor Heavy-duty 2-section hydraulic pump (on-self contained hydraulic units)	Choice: 540 RPM Series 6 CV Joint PTO Shaft STANDARD 1000 RPM Series 6 CV 1 3/4 20 Spline STANDARD 1000 RPM Series 6 CV 1 3/8 21 Spline STANDARD No PTO – Plug to Tractor Heavy-duty 2-section hydraulic pump (on-self contained hydraulic units)	Choice: 540 RPM Series 6 CV Joint PTO Shaft STANDARD 1000 RPM Series 6 CV 1 3/4 20 Spline STANDARD 1000 RPM Series 6 CV 1 3/8 21 Spline STANDARD No PTO – Plug to Tractor Heavy-duty 2-section hydraulic pump (on-self contained hydraulic units)	Choice: 540 RPM Series 6 CV Joint PTO Shaft STANDARD 1000 RPM Series 6 CV 1 3/4 20 Spline STANDARD 1000 RPM Series 6 CV 1 3/8 21 Spline STANDARD No PTO – Plug to Tractor Heavy-duty 2-section hydraulic pump (on-self contained hydraulic units)
Material Distribution Booms/Spinners/Air Line	6 x 1/4″ spinner fins per spinner Proprietary 2 1/2″ spinner motors (provides optimal pressure seal protection)	6 x 1/4″ spinner fins per spinner Proprietary 2 1/2″ spinner motors (provides optimal pressure seal protection)	6 x 1/4″ spinner fins per spinner Proprietary 2 1/2″ spinner motors (provides optimal pressure seal protection)	6 x 1/4″ spinner fins per spinner Proprietary 2 1/2″ spinner motors (provides optimal pressure seal protection)
Application Swath Width, ft (m)	Lime and Litter: Up to 50 feet (15.24 meters)	Lime and Litter: Up to 50 feet (15.24 meters)	Lime and Litter: Up to 50 feet (15.24 meters)	Lime and Litter: Up to 50 feet (15.24 meters)
Material Distribution Drive	Standard: Self Contained Hydraulics System Powered by PTO Shaft Standard Optional: Electric Oil Cooler for Truck Mounted units with Standard Hydraulics Optional: High Duty Cycle Hydraulics Package Optional: Tractor Supplied Hydraulics	Standard: Self Contained Hydraulics System Powered by PTO Shaft Standard Optional: Electric Oil Cooler for Truck Mounted units with Standard Hydraulics Optional: High Duty Cycle Hydraulics Package Optional: Tractor Supplied Hydraulics	Standard: Self Contained Hydraulics System Powered by PTO Shaft Standard Optional: Electric Oil Cooler for Truck Mounted units with Standard Hydraulics Optional: High Duty Cycle Hydraulics Package Optional: Tractor Supplied Hydraulics	Standard: Self Contained Hydraulics System Powered by PTO Shaft Standard Optional: Electric Oil Cooler for Truck Mounted units with Standard Hydraulics Optional: High Duty Cycle Hydraulics Package Optional: Tractor Supplied Hydraulics
Metering Drive	Tandem conveyor drive gearbox Standard: No High-Speed Conveyor (GR) Value Optional: High Speed Conveyor (GR) Valve	Tandem conveyor drive gearbox Standard: No High-Speed Conveyor (GR) Value Optional: High Speed Conveyor (GR) Valve	Tandem conveyor drive gearbox Standard: No High-Speed Conveyor (GR) Value Optional: High Speed Conveyor (GR) Valve	Tandem conveyor drive gearbox Standard: No High-Speed Conveyor (GR) Value Optional: High Speed Conveyor (GR) Valve
Primary Metering	34 inch conveyor with 88K heavy-duty chain, bars every other link (close bar). Standard: 2 runs of 88K Chain EOL Optional: 3rd run of 88K chain – Includes UHMW rear roller support.	34 inch conveyor with 88K heavy-duty chain, bars every other link (close bar). Standard: 2 runs of 88K Chain EOL Optional: 3rd run of 88K chain – Includes UHMW rear roller support.	34 inch conveyor with 88K heavy-duty chain, bars every other link (close bar). Standard: 2 runs of 88K Chain EOL Optional: 3rd run of 88K chain – Includes UHMW rear roller support.	34 inch conveyor with 88K heavy-duty chain, bars every other link (close bar). Standard: 2 runs of 88K Chain EOL Optional: 3rd run of 88K chain – Includes UHMW rear roller support.
Primary Metering Minimum Output Rate	-	-	-	-
Primary Metering Maximum Output Rate	-	-	-	-
Secondary Metering	N/A	N/A	N/A	N/A
Secondary Metering Minimum Output Rate	-	-	-	-
Secondary Metering Maximum Output Rate	-	-	-	-
Material Banding or Section Control	N/A	N/A	N/A	N/A

Tires and Axles

Transport wheel mounting	Standard: 7 Ton Torsion Tandem Axle (12.5L x 15 implement tires with 6 -bolt Hub) Optional: 9 Ton Heavy Duty Tandem Torsion Axle (16.5 x 16.1 R3 tires and 8 - Bolt Hub, 10,000 lb axles) or 10 Ton Walking Beam (16.5L x 16.1 R# Tires and 8-Bolt Hub) or 14 Ton Walking Beam 21.5L x 16.1 R3 Tires and 10-Bolt Hub) or 20 Ton Walking Beam (800/65R32 Tire and 10-Bolt Hub)	Standard: 7 Ton Torsion Tandem Axle (12.5L x 15 implement tires with 6 -bolt Hub) Optional: 9 Ton Heavy Duty Tandem Torsion Axle (16.5 x 16.1 R3 tires and 8 - Bolt Hub, 10,000 lb axles) or 10 Ton Walking Beam (16.5L x 16.1 R# Tires and 8-Bolt Hub) or 14 Ton Walking Beam 21.5L x 16.1 R3 Tires and 10-Bolt Hub) or 20 Ton Walking Beam (800/65R32 Tire and 10-Bolt Hub)	Standard: 7 Ton Torsion Tandem Axle (12.5L x 15 implement tires with 6 -bolt Hub) Optional: 9 Ton Heavy Duty Tandem Torsion Axle (16.5 x 16.1 R3 tires and 8 - Bolt Hub, 10,000 lb axles) or 10 Ton Walking Beam (16.5L x 16.1 R# Tires and 8-Bolt Hub) or 14 Ton Walking Beam 21.5L x 16.1 R3 Tires and 10-Bolt Hub) or 20 Ton Walking Beam (800/65R32 Tire and 10-Bolt Hub)	Standard: 7 Ton Torsion Tandem Axle (12.5L x 15 implement tires with 6 -bolt Hub) Optional: 9 Ton Heavy Duty Tandem Torsion Axle (16.5 x 16.1 R3 tires and 8 - Bolt Hub, 10,000 lb axles) or 10 Ton Walking Beam (16.5L x 16.1 R# Tires and 8-Bolt Hub) or 14 Ton Walking Beam 21.5L x 16.1 R3 Tires and 10-Bolt Hub) or 20 Ton Walking Beam (800/65R32 Tire and 10-Bolt Hub)
Transport tires	7 Ton Torsion Options: Standard: 12.5L x 15 Tires and 6-Bolt Wheel Optional: 14L x 16.1 Flotation Tires in lieu of Standard 9 Ton Torsion Options: Standard: 16.5L x 16.1 R3 Tires and 8-Bolt Wheel or 16.5L x 16.1 Ribbed Implement Tires and 8-Bolt Wheel Optional: 21.5 L x 16.1 R3 Flotation Tires in lieu of Standard or 21.5 L x 16.1 Ribbed Implement Flotation Tires in lieu of Standard or 500/ 45-22.5 Tires in lieu of Standard 14 Ton Walking Beam Options: Standard: 21.5L x 16.1 R3 Flotation Tire and 10-Bolt Wheel or 21.5L x 16 Ribbed Implement Flotation Tire and 10-Bolt Wheel Optional: 550/60-22.5 Tires in lieu of Standard: or 710/40-22.5 Tires in lieu of Standard 20 Ton Walking Beam Standard: 800/65R32 Tire and 10-Bolt Hub or Excluded Tires and Rims (Dealer to Supply)	7 Ton Torsion Options: Standard: 12.5L x 15 Tires and 6-Bolt Wheel Optional: 14L x 16.1 Flotation Tires in lieu of Standard 9 Ton Torsion Options: Standard: 16.5L x 16.1 R3 Tires and 8-Bolt Wheel or 16.5L x 16.1 Ribbed Implement Tires and 8-Bolt Wheel Optional: 21.5 L x 16.1 R3 Flotation Tires in lieu of Standard or 21.5 L x 16.1 Ribbed Implement Flotation Tires in lieu of Standard or 500/ 45-22.5 Tires in lieu of Standard 14 Ton Walking Beam Options: Standard: 21.5L x 16.1 R3 Flotation Tire and 10-Bolt Wheel or 21.5L x 16 Ribbed Implement Flotation Tire and 10-Bolt Wheel Optional: 550/60-22.5 Tires in lieu of Standard: or 710/40-22.5 Tires in lieu of Standard 20 Ton Walking Beam Standard: 800/65R32 Tire and 10-Bolt Hub or Excluded Tires and Rims (Dealer to Supply)	7 Ton Torsion Options: Standard: 12.5L x 15 Tires and 6-Bolt Wheel Optional: 14L x 16.1 Flotation Tires in lieu of Standard 9 Ton Torsion Options: Standard: 16.5L x 16.1 R3 Tires and 8-Bolt Wheel or 16.5L x 16.1 Ribbed Implement Tires and 8-Bolt Wheel Optional: 21.5 L x 16.1 R3 Flotation Tires in lieu of Standard or 21.5 L x 16.1 Ribbed Implement Flotation Tires in lieu of Standard or 500/ 45-22.5 Tires in lieu of Standard 14 Ton Walking Beam Options: Standard: 21.5L x 16.1 R3 Flotation Tire and 10-Bolt Wheel or 21.5L x 16 Ribbed Implement Flotation Tire and 10-Bolt Wheel Optional: 550/60-22.5 Tires in lieu of Standard: or 710/40-22.5 Tires in lieu of Standard 20 Ton Walking Beam Standard: 800/65R32 Tire and 10-Bolt Hub or Excluded Tires and Rims (Dealer to Supply)	7 Ton Torsion Options: Standard: 12.5L x 15 Tires and 6-Bolt Wheel Optional: 14L x 16.1 Flotation Tires in lieu of Standard 9 Ton Torsion Options: Standard: 16.5L x 16.1 R3 Tires and 8-Bolt Wheel or 16.5L x 16.1 Ribbed Implement Tires and 8-Bolt Wheel Optional: 21.5 L x 16.1 R3 Flotation Tires in lieu of Standard or 21.5 L x 16.1 Ribbed Implement Flotation Tires in lieu of Standard or 500/ 45-22.5 Tires in lieu of Standard 14 Ton Walking Beam Options: Standard: 21.5L x 16.1 R3 Flotation Tire and 10-Bolt Wheel or 21.5L x 16 Ribbed Implement Flotation Tire and 10-Bolt Wheel Optional: 550/60-22.5 Tires in lieu of Standard: or 710/40-22.5 Tires in lieu of Standard 20 Ton Walking Beam Standard: 800/65R32 Tire and 10-Bolt Hub or Excluded Tires and Rims (Dealer to Supply)

Monitoring and Precision Control

Monitors Options and Rate Control	Standard: No Controller Optional: Tee-Jet IC-38 ISOBUS Controller Optional: JD Greenstar Dry ECU Controller Optional: JD Greenstar Dry Ready (37 Pin) Optional: Rate Control Ready with Spinner Monitoring	Standard: No Controller Optional: Tee-Jet IC-38 ISOBUS Controller Optional: JD Greenstar Dry ECU Controller Optional: JD Greenstar Dry Ready (37 Pin) Optional: Rate Control Ready with Spinner Monitoring	Standard: No Controller Optional: Tee-Jet IC-38 ISOBUS Controller Optional: JD Greenstar Dry ECU Controller Optional: JD Greenstar Dry Ready (37 Pin) Optional: Rate Control Ready with Spinner Monitoring	Standard: No Controller Optional: Tee-Jet IC-38 ISOBUS Controller Optional: JD Greenstar Dry ECU Controller Optional: JD Greenstar Dry Ready (37 Pin) Optional: Rate Control Ready with Spinner Monitoring
Weigh System Option	Standard: No Scales or Weigh System Optional: Tee-Jet IC-38 Integrated Weigh System Optional: Digi-Star Indicator Weigh System – EZ2500 indicator Optional: Digi-Star Scale Link Weigh System	Standard: No Scales or Weigh System Optional: Tee-Jet IC-38 Integrated Weigh System Optional: Digi-Star Indicator Weigh System – EZ2500 indicator Optional: Digi-Star Scale Link Weigh System	Standard: No Scales or Weigh System Optional: Tee-Jet IC-38 Integrated Weigh System Optional: Digi-Star Indicator Weigh System – EZ2500 indicator Optional: Digi-Star Scale Link Weigh System	Standard: No Scales or Weigh System Optional: Tee-Jet IC-38 Integrated Weigh System Optional: Digi-Star Indicator Weigh System – EZ2500 indicator Optional: Digi-Star Scale Link Weigh System

Other Equipment Options

Option 1	Paint Options: Standard: Red Optional: Green or Gray	Paint Options: Standard: Red Optional: Green or Gray	Paint Options: Standard: Red Optional: Green or Gray	Paint Options: Standard: Red Optional: Green or Gray
Option 2	Standard: No Trap Optional: Electrical Roll Top Mesh Front to Rear Tarp	Standard: No Trap Optional: Electrical Roll Top Mesh Front to Rear Tarp	Standard: No Trap Optional: Electrical Roll Top Mesh Front to Rear Tarp	Standard: No Trap Optional: Electrical Roll Top Mesh Front to Rear Tarp
Option 3	Standard: No Tail lights Optional: Rear Tail Light Kit with Turn Signal, Side Markers & Wiring Kit	Standard: No Tail lights Optional: Rear Tail Light Kit with Turn Signal, Side Markers & Wiring Kit	Standard: No Tail lights Optional: Rear Tail Light Kit with Turn Signal, Side Markers & Wiring Kit	Standard: No Tail lights Optional: Rear Tail Light Kit with Turn Signal, Side Markers & Wiring Kit
Option 4	-	-	-	-
Equipment Options	-	-	-	-

Compare

Select up to 3 products to compare specifications

Endurance Spreader

Add Model & Size

Choose Model & Size

1 2

Product Specs

Series
Product type
Model
Size

Dimensions and Weights

Metering and Drive

PTO Drive	Choice: 540 RPM Series 6 CV Joint PTO Shaft STANDARD 1000 RPM Series 6 CV 1 3/4 20 Spline STANDARD 1000 RPM Series 6 CV 1 3/8 21 Spline STANDARD No PTO – Plug to Tractor Heavy-duty 2-section hydraulic pump (on-self contained hydraulic units)
Material Distribution Booms/Spinners/Air Line	6 x 1/4″ spinner fins per spinner Proprietary 2 1/2″ spinner motors (provides optimal pressure seal protection)
Application Swath Width, ft (m)	Lime and Litter: Up to 50 feet (15.24 meters)
Material Distribution Drive	Standard: Self Contained Hydraulics System Powered by PTO Shaft Standard Optional: Electric Oil Cooler for Truck Mounted units with Standard Hydraulics Optional: High Duty Cycle Hydraulics Package Optional: Tractor Supplied Hydraulics
Metering Drive	Tandem conveyor drive gearbox Standard: No High-Speed Conveyor (GR) Value Optional: High Speed Conveyor (GR) Valve
Primary Metering	34 inch conveyor with 88K heavy-duty chain, bars every other link (close bar). Standard: 2 runs of 88K Chain EOL Optional: 3rd run of 88K chain – Includes UHMW rear roller support.
Primary Metering Minimum Output Rate	-
Primary Metering Maximum Output Rate	-
Secondary Metering	N/A
Secondary Metering Minimum Output Rate	-
Secondary Metering Maximum Output Rate	-
Material Banding or Section Control	N/A

Explore More

Downloads

BBI Literature

English

Click to Download

BBI Literature

French

Click to Download

PARTS AND SERVICE

Parts Look-up

Click Here to Look-Up Parts

Working width, ft (m)	-	-	-	-
Transport width, ft (m)	-	-	-	-
Transport height, ft (m)	-	-	-	-
Approximate weight, lb (kg)	-	-	-	-
Other sizes available, number of capacities	18 ft, 20 ft, 24 ft	16 ft, 20 ft, 24 ft	16 ft, 18 ft, 24 ft	16 ft, 18 ft, 20 ft

Hookup to tractor, mounted or pull-type	Pull-Type - Standard: Cast Hitch Option includes Pintle and Clevis Hitch Optional: CAT 4 Articulating Hitch	Pull-Type - Standard: Cast Hitch Option includes Pintle and Clevis Hitch Optional: CAT 4 Articulating Hitch	Pull-Type - Standard: Cast Hitch Option includes Pintle and Clevis Hitch Optional: CAT 4 Articulating Hitch	Pull-Type - Standard: Cast Hitch Option includes Pintle and Clevis Hitch Optional: CAT 4 Articulating Hitch
Jack	Heavy Duty Jack	Heavy Duty Jack	Heavy Duty Jack	Heavy Duty Jack

Working width, ft (m)	-
Transport width, ft (m)	-
Transport height, ft (m)	-
Approximate weight, lb (kg)	-
Other sizes available, number of capacities	18 ft, 20 ft, 24 ft

Hookup to tractor, mounted or pull-type	Pull-Type - Standard: Cast Hitch Option includes Pintle and Clevis Hitch Optional: CAT 4 Articulating Hitch
Jack	Heavy Duty Jack

Endurance Spreader