56N Series Mounted Cover Crop Seeder

Features

Salford’s 56 Series Applicators are your versatile partners in farming, now enhanced with the NEW 5056N and 7056N granular applicators. The “N” in 56N means “Narrow”, fitting perfectly on Salford’s HALO narrow folding tillage tools. The 56N maintains the accuracy and reliability of Salford cover crop seeders; while simplifying air line routing, boosting air flow, and improving material distribution for narrow folding tillage implements. The 56N goes where you go, boosts your efficiency and helps improve soil health.

56N models have been designed to fit onto the frame of Salford’s HALO narrow folding tillage implements. Along with being narrow enough to fit onto the HALO frame, the 5056N has a 50 cubic foot capacity, and the 7056N has a 70 cubic foot capacity. The hopper sizes are designed to pair with HALO models to minimize the time between fills. The 56N models have large hopper openings for faster filling. The large opening also provides easy access, should maintenance be required inside the hopper. The steel bin screens are designed for fast filling, while prevent large clumps of fertilizer and foreign material from being fed into the system. Sight windows near the top and bottom on each side of the hopper allow the operator to see when the bin is full and when it is nearly empty. An operator platform with a folding and locking ladder gives the operator safe and easy access to the hopper.

The 56N Series is controlled with an ISOBUS connection, designed to run with existing virtual terminals in the tractor. This allows for left/right section control and rate adjustment. This unit uses only one hydraulic remote to power the metering system and fan. The lines feature color coded hose grips to help align the connections with the operators preferred SCV. The 56N Series is equipped with a bin level sensor to alert the operator when the hopper is almost out of material.

The 56N Series can be equipped with a 12 groove grey metering roller, or a 28 groove red metering roller. The 12 groove roller accurately meters for higher rates or larger seeds, while the 28 groove metering roller is designed for lower rates or smaller seed.

Product Specs

Series
- -
Size
50 cu-ft 70 cu-ft
Product type
Granular Applicators Granular Applicators
Model Name Short
5056N 7056N
Model Name Long
- -

Materials Spread

Fertilizer
NO NO
AG Lime
NO NO
Litter
NO NO
Organics
NO NO
Seed
YES YES
Other
- -
Number of products applied, including optional hopper compartments
1 1

Detailed Equipment Specifications

Paint

Black

Black

Hitch

Applicator is implement mounted.
Custom mounting may be required.

Applicator is implement mounted.
Custom mounting may be required.

Jack
- -
Tarp

Weather tight lid

Weather tight lid

Tail Light
- -
Height
78.5"" 80.5"
Weight
1500 lbs 1700 Ibs

Hopper

Hopper Size

78.5″ H x 74.25″ L x 37.5″ W

*56N dimensions are for an un-mounted unit and do not include the operator platform and ladder.

80.5″ H x 75″ L x 49.5″ W

*56N dimensions are for an un-mounted unit and do not include the operator platform and ladder.

Hopper Material

Black Steel hopper

Black Steel hopper

Hopper Extensions
- -
Hopper Gate Control

Manual open/close

Manual open/close

Hopper Ladder

Ladder and platform

Ladder and platform

Hopper "Inverted V"
- -
Hopper Sight Window

Sight windows near the top and bottom on each side of the hopper allow the operator to see when the bin is full and when it is nearly empty.

Sight windows near the top and bottom on each side of the hopper allow the operator to see when the bin is full and when it is nearly empty.

Metering and Drive

PTO Drive
- -
Material Distribution Booms/Spinners/Air Line

16 Outlets

24-Outlets

Application Swath Width

20-30 feet**

**The recommended spacing is 20 inches between outlets, but can safely vary to match the HALO series working widths.

35-40 feet**

**The recommended spacing is 20 inches between outlets, but can safely vary to match the HALO series working widths.

Material Distribution Drive

Hydraulic direct drive fan

Hydraulic direct drive fan

Metering Drive

Hydrualic driven metering

Hydrualic driven metering

Primary Metering
- -
Primary Metering Minimum Output Rate
- -
Primary Metering Maximum Output Rate
- -
Secondary Metering
- -
Secondary Metering Minimum Output Rate
- -
Secondary Metering Maximum Output Rate
- -
Material Banding or Section Control

Two section metering system – Electric Clutch

Two section metering system – Electric Clutch

Tires and Axles

Axle
- -
Tire and Wheel Options
- -

Monitoring and Precision Control

Monitors Options and Rate Control

ISO Control

ISO Control

Weigh System Option
- -

Compare

Select up to 3 products to compare specifications

56N Series Mounted Cover Crop Seeder

Add Model & Size

Choose Model & Size

Product Specs

Series
-
Size
50 cu-ft
Product type
Granular Applicators
Model Name Short
5056N
Model Name Long
-

Materials Spread

Fertilizer
NO
AG Lime
NO
Litter
NO
Organics
NO
Seed
YES
Other
-
Number of products applied, including optional hopper compartments
1

Detailed Equipment Specifications

Paint

Black

Hitch

Applicator is implement mounted.
Custom mounting may be required.

Jack
-
Tarp

Weather tight lid

Tail Light
-
Height
78.5""
Weight
1500 lbs

Hopper

Hopper Size

78.5″ H x 74.25″ L x 37.5″ W

*56N dimensions are for an un-mounted unit and do not include the operator platform and ladder.

Hopper Material

Black Steel hopper

Hopper Extensions
-
Hopper Gate Control

Manual open/close

Hopper Ladder

Ladder and platform

Hopper "Inverted V"
-
Hopper Sight Window

Sight windows near the top and bottom on each side of the hopper allow the operator to see when the bin is full and when it is nearly empty.

Metering and Drive

PTO Drive
-
Material Distribution Booms/Spinners/Air Line

16 Outlets

Application Swath Width

20-30 feet**

**The recommended spacing is 20 inches between outlets, but can safely vary to match the HALO series working widths.

Material Distribution Drive

Hydraulic direct drive fan

Metering Drive

Hydrualic driven metering

Primary Metering
-
Primary Metering Minimum Output Rate
-
Primary Metering Maximum Output Rate
-
Secondary Metering
-
Secondary Metering Minimum Output Rate
-
Secondary Metering Maximum Output Rate
-
Material Banding or Section Control

Two section metering system – Electric Clutch

Tires and Axles

Axle
-
Tire and Wheel Options
-

Monitoring and Precision Control

Monitors Options and Rate Control

ISO Control

Weigh System Option
-

Downloads

56N Sell Sheet

English