If you’re looking for accuracy, speed and capacity, the Salford Valmar 8700 pull-type spreader is your go-to machine. Built for large-scale farms or to cover a lot of acres, this model combines speed and accuracy to deliver rates as high as 1,000 pounds per acre at 8 miles per hour. The 8700 comes equipped with a 72-foot boom for maximum application or 60-foot row crop boom for broadcast and in-season granular application and is capable of variable rate application and left/right section control. The highly accurate Venturi metering system is user friendly, simple to calibrate and easy to operate.
8700 Applicator
Features
The 8700 has two main hopper size options; the 8708 with an 8-ton hopper and the 8711 with an 11-ton hopper. The 8708 has 260 cubic feet of total capacity with the option to split the hopper with a 60 cubic foot hopper with a 200 cubic foot main hopper. The 8711 features 357 cubic feet of total capacity with the option to add a 60 cubic foot micro hopper with a 297 cubic foot main hopper. Higher capacity hoppers allow for you to cover more acres with less downtime for fill ups. The hopper itself is constructed of corrosion-resistant, painted 409 stainless steel and comes with a roll tarp installed.
The Valmar 8700 can be configured with either a ground-driven or hydraulic metering system. The ground-driven system, which is standard on the 8708, uses an accurate 60-speed gearbox which allow for rate adjustments in 5% increments for precise application with a wide variety of granular products. Left/right metering section control can be manually operated from the cab to minimize overlap throughout the field. The ground-driven system is not available for the 8711. The hydraulic-driven metering system, which is standard on the 8711 and optional on the 8708, can automate the left/right hand control and allows for variable rate application using ISOBUS control through a third-party rate controller.
The 8700 also has the option to add a second metering system with a micro hopper. Using a 28-groove metering roller allows for precise application of granular herbicide, seed, or micronutrients at the same rate as you apply fertilizer.
The Valmar 8700 features 60-foot booms on the 8708 and 72-foot booms on the 8711. Using hydraulic fold booms built with high-quality 304 stainless steel allows the 8700 booms to stand up to the abrasive nature of granular fertilizer application. These booms are equipped with rubber torsion suspension, which do not require any service and reduce friction, bouncing, and wear of the booms while operating at higher speeds. Hydraulic folding, 7-foot break-away boom tips are also implemented on the 8600 to minimize damage that may occur from striking obstacles in the field.
The left and right boom are supplied independently for the greatest application accuracy, and allowing for left/right right section control in hydraulically driven and mechanically driven machines.
Originally designed to meet the needs of row crop farmers, the 8700 features axles which can be adjusted from 72 inches up to 120 inches with the wide adjustable axle option and row crop tires to accommodate most row spacings. In addition, the 8700 can be equipped with optional tire sizes to achieve greater flotation or narrower tracking, depending on the crop and/or the tractor pulling the implement.
The Valmar 8708 with 60-foot booms allows for use of drop tubes on 30-inch centers for post emergence application of nutrients or interseeding cover crops into standing crops when paired with narrow row crop tires. This allows you to spoon feed nutrients to the plant throughout the growing season while keeping granular fertilizers out of the whirl of the corn crop, which can cause potential plant damage. For spring or fall application, the drop tube kit can be taken off and replaced with deflectors for broadcast application.
Product Specs
Series
|
Valmar | Valmar |
Size
|
260 cu-ft | 357 cu-ft |
Product type
|
Pull Type Air Boom Applicators | Pull Type Air Boom Applicators |
Model Name Short
|
8708 | 8711 |
Model Name Long
|
8708 Pull Type Air Boom Applicators | 8711 Pull Type Air Boom Applicators |
Materials Spread
Fertilizer
|
YES | YES |
AG Lime
|
NO | NO |
Litter
|
NO | NO |
Organics
|
NO | NO |
Seed
|
YES | YES |
Other
|
Granular Herbicide / Crop Protection Products | - |
Number of products applied, including optional hopper compartments
|
2 (optional) | 2 |
Detailed Equipment Specifications
Paint
|
Red |
Red |
Hitch
|
Standard: Cat 3 Cast Hitch |
Standard: Cat 3 Cast Hitch |
Jack
|
Heavy-duty tongue jack | Heavy-duty tongue jack |
Tarp
|
Roll Tarp included |
Roll Tarp included |
Tail Light
|
Rear Tail Lights with Turn Signal, Side Markers |
Rear Tail Lights with Turn Signal, Side Markers |
Height
|
152" | 162" |
Weight
|
8,700 lbs | 10,500 lbs |
Hopper
Hopper Size
|
Standard: 260 cubic feet |
Standard: 357 cubic feet |
Hopper Material
|
409 stainless steel, painted |
409 stainless steel, painted |
Hopper Extensions
|
N/A |
N/A |
Hopper Gate Control
|
N/A |
N/A |
Hopper Ladder
|
Ladder and platform |
Ladder and platform |
Hopper "Inverted V"
|
Yes |
Yes |
Hopper Sight Window
|
No |
N/A |
Metering and Drive
PTO Drive
|
Standard: PTO FAN DRIVE – 1000 RPM – 1⅜”, 21 SPL – PTO Driveline Shaft and storage pin |
Standard: PTO FAN DRIVE – 1000 RPM – 1⅜”, 21 SPL – PTO Driveline Shaft and storage pin |
Material Distribution Booms/Spinners/Air Line
|
∙ 60 feet spread / 304 stainless steel / hydraulic fold |
∙ 66 feet spread / 304 stainless steel / hydraulic fold |
Application Swath Width
|
|
72 Feet |
Material Distribution Drive
|
17 inch fan impellor |
17 inch fan impellor |
Metering Drive
|
Option: Ground driven metering |
Hydraulically driven metering |
Primary Metering
|
Two 14″, 304 stainless steel conveyor chains, 12 outlets (6 outlets per side) |
Two 14″, 304 stainless steel conveyor chains, 12 outlets (6 outlets per side) |
Primary Metering Minimum Output Rate
|
- | Call |
Primary Metering Maximum Output Rate
|
- | Call |
Secondary Metering
|
|
|
Secondary Metering Minimum Output Rate
|
- | - |
Secondary Metering Maximum Output Rate
|
- | - |
Material Banding or Section Control
|
Primary Metering: Left/Right Section Control available with Hydrualic drive Optional: Drop tube kit. 30-in. spacing for post emergence application |
Primary Metering: Left/Right Section Control available |
Tires and Axles
Axle
|
- | Option 01: Tire & Rim 800/65R32 R1 Lug radial floatation |
Tire and Wheel Options
|
Option: Tire & Rim 750/65R26 R1 Lug radial floatation |
- |
Monitoring and Precision Control
Monitors Options and Rate Control
|
Standard: Air manifold pressure gauge |
Standard: Air manifold pressure gauge |
|
Weigh System Option
|
|
Optional: Scale Kit |
Compare
8700 Applicator
Add Model & Size
Choose Model & SizeProduct Specs
Series
|
Valmar | |||
Size
|
260 cu-ft | |||
Product type
|
Pull Type Air Boom Applicators | |||
Model Name Short
|
8708 | |||
Model Name Long
|
8708 Pull Type Air Boom Applicators |
Materials Spread
Fertilizer
|
YES | |||
AG Lime
|
NO | |||
Litter
|
NO | |||
Organics
|
NO | |||
Seed
|
YES | |||
Other
|
Granular Herbicide / Crop Protection Products | |||
Number of products applied, including optional hopper compartments
|
2 (optional) |
Detailed Equipment Specifications
Paint
|
Red |
|||
Hitch
|
Standard: Cat 3 Cast Hitch |
|||
Jack
|
Heavy-duty tongue jack | |||
Tarp
|
Roll Tarp included |
|||
Tail Light
|
Rear Tail Lights with Turn Signal, Side Markers |
|||
Height
|
152" | |||
Weight
|
8,700 lbs |
Hopper
Hopper Size
|
Standard: 260 cubic feet |
|||
Hopper Material
|
409 stainless steel, painted |
|||
Hopper Extensions
|
N/A |
|||
Hopper Gate Control
|
N/A |
|||
Hopper Ladder
|
Ladder and platform |
|||
Hopper "Inverted V"
|
Yes |
|||
Hopper Sight Window
|
No |
Metering and Drive
PTO Drive
|
Standard: PTO FAN DRIVE – 1000 RPM – 1⅜”, 21 SPL – PTO Driveline Shaft and storage pin |
|||
Material Distribution Booms/Spinners/Air Line
|
∙ 60 feet spread / 304 stainless steel / hydraulic fold |
|||
Application Swath Width
|
|
|||
Material Distribution Drive
|
17 inch fan impellor |
|||
Metering Drive
|
Option: Ground driven metering |
|||
Primary Metering
|
Two 14″, 304 stainless steel conveyor chains, 12 outlets (6 outlets per side) |
|||
Primary Metering Minimum Output Rate
|
- | |||
Primary Metering Maximum Output Rate
|
- | |||
Secondary Metering
|
|
|||
Secondary Metering Minimum Output Rate
|
- | |||
Secondary Metering Maximum Output Rate
|
- | |||
Material Banding or Section Control
|
Primary Metering: Left/Right Section Control available with Hydrualic drive Optional: Drop tube kit. 30-in. spacing for post emergence application |
Tires and Axles
Axle
|
- | |||
Tire and Wheel Options
|
Option: Tire & Rim 750/65R26 R1 Lug radial floatation |
Monitoring and Precision Control
Monitors Options and Rate Control
|
Standard: Air manifold pressure gauge |
||||
Weigh System Option
|
|