MagnaSpread PLUS+ Spinner Spreader

Application • Pull Type Spinner Spreaders

Features

Build for efficiency and performance, Salford’s BBI MagnaSpread Plus+ combines the use of one spreader to maximize both fertilizer and lime application widths, saving you time and money. This machine has the capacity to spread dry fertilizer up to 120’ and lime up to 60’ – all with one machine. The new MagnaSpread Plus+ builds on the industry leading performance of Salford’s BBI MagnaSpread by adding new technology to maximize your investment.

• Hydraulic Binary Manifold with pilot operated relief, manual flow controls for spinner and conveyor
• High duty-cycle hydraulics, with oil cooler, GR valve
• Series 6 CV joint PTO shaft
• Overhead mounted spinner motors
• Tandem conveyor drive gearbox
• Stainless steel spinners, fins and spread shield
• 1 set each of fertilizer and ag lime flow dividers and fins
• 12′ Stainless steel hopper with access ladder (Hopper Volume 264 cu-ft struck)
• Over-slung center ‘V’
• 30″ belt-over-bar conveyor
• 90″ to 120″ adjustable axles with 380/90R46 tires
• Heavy-duty tongue jack
• Spreader pan test kit

• Hydraulic Binary Manifold with pilot operated relief, manual flow controls for spinner and conveyor
• High duty-cycle hydraulics, with oil cooler, GR valve
• Series 6 CV joint PTO shaft
• Overhead mounted spinner motors
• Tandem conveyor drive gearbox
• Stainless steel spinners, fins and spread shield
• 1 set each of fertilizer and ag lime flow dividers and fins
• 20′ Stainless steel hopper with access ladder (Hopper Volume 440 cu-ft struck)
• Over-slung center ‘V’
• 30″ belt-over-bar conveyor
• 20-Ton walking beam suspension with 800/65R32 tires
• Heavy-duty tongue jack and Category 4 Articulating Hitch
• Spreader pan test kit

Salford BBI spreaders are designed to save time and cost of application by achieving industry leading application widths. In order to maximize the application width with each material the MagnaSpread Plus requires a spinner and flow divider change over. Switch from fertilizer application to lime application with two people in under 30 minutes! *Maximum application width varies by material quality.

The MagnaSpread Plus uses tried and tested hopper designs, the high-clearance single axle 12 foot hopper or the tandem axle 20 foot hopper, equipped with Salford’s latest advancements in application technology. Engineering improvements make this spreader even more accurate and easy to set. The axle configurations help producers who need the widest application window or those looking for the maximum pay load.

Patented hydraulics control system – connectivity to all major precision agriculture technology brands

- Variable Rate ready ISOBUS compatibility to most major precision control systems
- Multiple factory-installed systems available

High quality JIC fittings & true hydraulic pipe

GR Valve – increasing chain speed

Hy-Torque manifold – increasing available spinner torque

Contact Us Form

"*" indicates required fields

Need some tech support?
Find your equipment's Manual here. Check out the How-To Videos page for tips and tricks on operating and maintaining your Salford equipment, and explore our How-To Blog posts for even more helpful resources.

First Name * Last Name *

Phone Number*

Email*

State/Provice*

Postal code*

How can we help you?*

Salford Model Line*

Serial Number

Message to Salford

Name

This field is for validation purposes and should be left unchanged.

Specs Compare

Product Specs

Series	BBI	BBI
Product type	Pull Type Spinner Spreaders	Pull Type Spinner Spreaders
Model	MagnaSpread Plus	MagnaSpread Plus
Size	264 cu-ft (7.48 cu-m) 12 ft (3.66 m) Single Axle	440 cu-ft (12.46 cu-m) 20 ft (6.10 m) Tandem Axle

Dimensions and Weights

Hopper

Hopper Size	12 feet High Profile Hopper 264 cu-ft (7.48 cu-m)	20 feet 96 inches Wide Hopper 440 cu-ft (12.46 cu-m)
Hopper Material	Standard: 409 Stainless Steel, Painted Optional: 304 Stainless Steel	Standard: 409 Stainless Steel, Painted Optional: 304 Stainless Steel
Hopper Extensions	Standard: No Extension Brackets Optional: Extension Brackets for 6 inch boards	Standard: No Extension Brackets Optional: 6 inch extension brackets Optional: Extension Brackets for 6 inch boards
Hopper Gate Control	Jack Operated Gate	Jack Operated Gate
Hopper Ladder	-	-
Hopper "Inverted V"	Standard: Removeable Invertered V * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper.	Standard: Removeable Invertered V * The Inverted V running along the length of the hopper help prevent material from bridging in the hopper.
Hopper Sight Window	Standard Sight Window	Standard Sight Window

Metering and Drive

PTO Drive	Choice: 1000 RPM Series 6 CV 1 3/4 20 Spline Choice: 1000 RPM Series 6 CV 1 3/8 21 Spline Choice: Tractor Supplied Hydraulics for MagnaSpread* *Requires 50 GPM total with max pressure of 2800 PSI. 2 Remotes, 1 at 30 GPM with a 3rd line case drain for Spinners and 1 at 20 GPM for the Conveyor. This hydraulic configuration (does not) include an oil cooler and one cannot be added. Use of 1/2″ coupler on spinner circuit will likely result in reduced performance in heavy applications such as lime.	Choice: 1000 RPM Series 6 CV 1 3/4 20 Spline Choice: 1000 RPM Series 6 CV 1 3/8 21 Spline Choice: Tractor Supplied Hydraulics for MagnaSpread* *Requires 50 GPM total with max pressure of 2800 PSI. 2 Remotes, 1 at 30 GPM with a 3rd line case drain for Spinners and 1 at 20 GPM for the Conveyor. This hydraulic configuration (does not) include an oil cooler and one cannot be added. Use of 1/2″ coupler on spinner circuit will likely result in reduced performance in heavy applications such as lime.
Material Distribution Booms/Spinners/Air Line	30 inch dished spinner design for precision coverage Stainless steel spinners, fins and spread shield	30 inch dished spinner design for precision coverage Stainless steel spinners, fins and spread shield
Application Swath Width, ft (m)	Lime: Up to 50 feet (15.24 meters) Fert: Up to 120 feet (36.58 meters)	Lime: Up to 50 feet (15.24 meters) Fert: Up to 120 feet (36.58 meters)
Material Distribution Drive	Standard: Self Contained PTO Hydraulics Optional: Plug to Tractor Hydraulics	Standard: Self Contained PTO Hydraulics Optional: Plug to Tractor Hydraulics
Metering Drive	Tandem conveyor drive gearbox Optional: High Speed Conveyor Valve	Tandem conveyor drive gearbox Optional: High Speed Conveyor Valve
Primary Metering	Standard: 30 inch Belt-Over-Bar Chain	Standard: 30 inch Belt-Over-Bar Chain
Primary Metering Minimum Output Rate	-	-
Primary Metering Maximum Output Rate	-	-
Secondary Metering	N/A	N/A
Secondary Metering Minimum Output Rate	-	-
Secondary Metering Maximum Output Rate	-	-
Material Banding or Section Control	N/A	N/A

Compare

Select up to 3 products to compare specifications

MagnaSpread PLUS+ Spinner Spreader

Add Model & Size

Choose Model & Size

1 2

Product Specs

Series
Product type
Model
Size

Dimensions and Weights

Metering and Drive

PTO Drive	Choice: 1000 RPM Series 6 CV 1 3/4 20 Spline Choice: 1000 RPM Series 6 CV 1 3/8 21 Spline Choice: Tractor Supplied Hydraulics for MagnaSpread* *Requires 50 GPM total with max pressure of 2800 PSI. 2 Remotes, 1 at 30 GPM with a 3rd line case drain for Spinners and 1 at 20 GPM for the Conveyor. This hydraulic configuration (does not) include an oil cooler and one cannot be added. Use of 1/2″ coupler on spinner circuit will likely result in reduced performance in heavy applications such as lime.
Material Distribution Booms/Spinners/Air Line	30 inch dished spinner design for precision coverage Stainless steel spinners, fins and spread shield
Application Swath Width, ft (m)	Lime: Up to 50 feet (15.24 meters) Fert: Up to 120 feet (36.58 meters)
Material Distribution Drive	Standard: Self Contained PTO Hydraulics Optional: Plug to Tractor Hydraulics
Metering Drive	Tandem conveyor drive gearbox Optional: High Speed Conveyor Valve
Primary Metering	Standard: 30 inch Belt-Over-Bar Chain
Primary Metering Minimum Output Rate	-
Primary Metering Maximum Output Rate	-
Secondary Metering	N/A
Secondary Metering Minimum Output Rate	-
Secondary Metering Maximum Output Rate	-
Material Banding or Section Control	N/A

Explore More

Testimonials

Application • Pull Type Spinner Spreaders • BBI • Compost/Manure Application • Fertilizer Application • Lime Application

Saskatchewan, Canada

Feb 03, 2022

Application • Pull Type Spinner Spreaders • BBI • Crop Protection Application • Fertilizer Application

"I’m really impressed with the uniformity, it spreads 80ft wide and it overlaps very little..."

Ontario, Canada

Oct 06, 2022

Downloads

BBI Literature

English

Click to Download

BBI Literature

French

Click to Download

PARTS AND SERVICE

Parts Look-up

Click Here to Look-Up Parts

Working width, ft (m)	-	-
Transport width, ft (m)	-	-
Transport height, ft (m)	-	-
Approximate weight, lb (kg)	-	-
Other sizes available, number of capacities	-	-

Fertilizer	YES	YES
AG Lime	YES	YES
Litter	NO	NO
Organics	NO	NO
Seed	NO	NO
Other	-	-
Number of products applied, including optional hopper compartments	1	1

Transport wheel mounting	90 inch to 120 inch adjustable axles	90 inch to 120 inch adjustable axles
Transport tires	380/90R46 tires	380/90R46 tires

Option 1	Paint colors - Standard: Red Optional: Green, Grey and Black Accent Parts (304 SS)	Paint colors - Standard: Red Optional: Green, Grey and Black Accent Parts (304 SS)
Option 2	Standard: No Trap Optional: Tarp for Standard or High Profile Hoppers Stainless End Caps	Standard: No Trap Optional: Tarp for Standard or High Profile Hoppers Stainless End Caps
Option 3	Rear Tail lights with turn signal, Side markers	Rear Tail lights with turn signal, Side markers
Option 4	-	-
Equipment Options	-	-

Working width, ft (m)	-
Transport width, ft (m)	-
Transport height, ft (m)	-
Approximate weight, lb (kg)	-
Other sizes available, number of capacities	-

MagnaSpread PLUS+ Spinner Spreader