The 5200 Enforcer takes high-speed tillage to the next level. Built to perform in even the toughest field conditions, the Enforcer designed to meet your tillage needs – leveling and uniformly mixing soil and residue between 3 inches and 5 inches at speeds of up to 9 mph. The go-to machine for high-speed primary tillage, the redesigned blade layout of the 5200 increases the stability of the machine, providing ideal residue blending and superior field finishing. The machine’s heavy-duty blade mounts and added clearance on the 5200 penetrate dry, hard ground and won’t plug in wet soil.
5200 Enforcer Models
Features
The 5200 has four rows of blades compared to a traditional tandem disk only having two rows. The result is twice as much work in one pass. The 5200 also has independently mounted blades with rubber compression obstacle protection. This allows each blade to flex up to 5 inches vertically over obstacles in the field. With no gang bolt, spools or scrapes the 5200 can move through much more residue and moisture than a tandem disk, with far less risk of plugging.
When maintaining the 5200 there is no need to replace spools or scrapers and each blade and bearing can be serviced individually.
The 5200 Enforcer starts with an innovative blade mount. The arm of the blade mount is made of a heavy spring steel, bent in multiple directions.
First the blade is tipped under, this allows the 5200 to bite into the soil and prevents the machine from riding out in hard ground.
Then the blade mount is twisted “open”, which helps the 5200 scoop a wider swath of the soil and residue up and flip them over. The final row of blades is less “open” helping the machine level the field more ahead of the Salford finishing system.
With four rows of blades on the 5200 Enforcer is capable of a better soil and residue mix in one pass than virtually any other tillage tool.
5200 Enforcer models are available with either manually adjustable, or FLEX FINISH hydraulically adjustable finishing systems.
Three rows of 1/2 inch diameter by 20 inch high leveling tines help to evenly distribute soil and residue to eliminate clumps and bunches of material on the surface.
The 14 inch diameter rolling basket crushing soil clods and residue leaving a smooth surface for other field operations such as seeding, spraying and harvesting. The rolling basket also helps pin residue to the surface, helping to minimize drifting material.
FLEX FINISH hydraulically adjustable finishing systems allow operators to adapt to field conditions on the fly by adjusting the rolling basket pressure, tine pitch, or both right from the tractor cab.
Product Specs
|
Series
|
Salford Tillage | Salford Tillage | Salford Tillage | Salford Tillage | Salford Tillage | Salford Tillage | Salford Tillage | Salford Tillage |
|
Product Type
|
5200 Enforcer | 5200 Enforcer | 5200 Enforcer | 5200 Enforcer | 5200 Enforcer | 5200 Enforcer | 5200 Enforcer | 5200 Enforcer |
|
Model
|
5200 | 5200 | 5200 | 5200 | 5200 | 5200 | 5200 | 5200 |
|
Size
|
12 ft | 16 ft | 19 ft | 22 ft | 25 ft | 29 ft | 36 ft | 39 ft |
|
Folding (Multi-Section) or Non-Folding
|
Non Folding | Folding | Folding | Folding | Folding | Folding | Folding | Folding |
|
Fold Type
|
N/A | 3 Section, Flat Fold | 3 section | 3 Section | 3 Section | 3 Section | 3 Section | 3 Section |
Dimensions and Weights
|
Working width, ft (m)
|
12 ft 1 in (3.68 m) | 15 ft 5 in (4.7 m) | 18 ft 9 in (5.72 m) | 22 ft 1 in (6.73 m) | 25 ft 5 in (7.75 m) | 28 ft 9 in (8.76 m) | 35 ft 5 in (10.8 m) | 38 ft 9 in (11.81 m) |
|
Transport width, ft (m)
|
13 ft 10 in (4.22 m) | 11 ft 6 in (3.51 m) | 15 ft 2 in (4.62 m) | 15 ft 2 in (4.62 m) | 15 ft 2 in (4.62 m) | 15 ft 2 in (4.62 m) | 20 ft 6 in (6.25 m) | 20 ft 6 in (6.25 m) |
|
Transport height, ft (m)
|
N/A | 9 ft (2.74 m) | 10 ft 3 in (3.12 m) | 12 ft 4 in (3.76 m) | 13 ft 5 in (4.09 m) | 14 ft 7 in (4.45 m) | 14 ft 6 in (4.42 m) | 15 ft 11 in (4.85 m) |
|
Approximate weight, lb (kg) (w/ Standard harrows unless stated otherwise)
|
13,500 lbs (6,123 kg) | 15,600 lbs (7,076 kg) | 23,200 lbs (10,523 kg) | 23,750 lbs (10,773 kg) | 25,900 lbs (11,748 kg) | 30,100 lbs (13,653 kg) | 37,200 lbs (16,874 kg) | 38,000 lbs (17,236 kg) |
|
Other sizes available, number of widths
|
16ft, 19ft, 22ft, 25ft, 29ft, 36ft, 39ft | 12ft, 19ft, 22ft, 25ft, 29ft, 36ft, 39ft | 12ft, 16ft, 22ft, 25ft, 29ft, 36ft, 39ft | 12ft, 16ft, 19ft, 25ft, 29ft, 36ft, 39ft | 12ft, 16ft, 19ft, 22ft, 29ft, 36ft, 29ft | 12ft, 16ft, 19ft, 22ft, 25ft, 36ft, 39ft | 12ft, 16ft, 19ft, 22ft, 25ft, 29ft, 39ft | 12ft, 16ft, 19ft, 22ft, 25ft, 29ft, 36ft |
Ground Engaging Equipment - Front Row(s)
|
Front row(s) ground engaging equipment (description)
|
5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade |
|
Front row(s) ground engaging equipment (quantity)
|
3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
|
Front row(s) equipment quantity
|
21 | 27 | 33 | 39 | 45 | 51 | 63 | 69 |
|
Front row(s) equipment mount
|
Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount |
|
Equipment spacing, in (mm)
|
5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) |
|
Equipment size, in (mm)
|
22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] |
|
Angle
|
Double compound angle | Double compound angle | Double compound angle | Double compound angle | Double compound angle | Double compound angle | Double compound angle | Double compound angle |
|
Bearings
|
Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing |
Ground Engaging Equipment - Rear Row(s)
|
Rear row(s) ground engaging equipment (description)
|
5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade | 5 bolt concave blade |
|
Rear row(s) ground engaging equipment (quantity)
|
1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
|
Rear row(s) equipment quantity
|
7 | 9 | 11 | 13 | 15 | 17 | 21 | 23 |
|
Rear row(s) equipment mount
|
Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount | Rubber V-Wedge Suspension w/ V-Bolt Mount |
|
Equipment spacing, in (mm)
|
5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) | 5 in (127 mm) |
|
Equipment size, in (mm)
|
22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] | 22 in (559 mm) [Optional: 24 in (609 mm)] |
|
Angle
|
Single compound angle | Single compound angle | Single compound angle | Single compound angle | Single compound angle | Single compound angle | Single compound angle | Single compound angle |
|
Bearings
|
Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing | Double Tapered Roller Bearing |
|
Equipment options
|
- | - | - | - | - | - | - | - |
Wheels and Tires
|
Transport wheel mounting
|
Dual axle 8-bolt | Dual axle 8-bolt | Dual axle 8-bolt | Dual axle 8-bolt | Dual axle 8-bolt | Dual axle 8-bolt | Dual axle 10-bolt | Dual axle 10-bolt |
|
Transport tires
|
305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 425/65 R22.5 Recapped Truck Tires | 425/65 R22.5 Recapped Truck Tires |
|
Wing wheel mounting
|
N/A | N/A | Single axle 6-bolt | Dual axle 6-bolt | Dual axle 6-bolt | Dual axle 8-bolt | Dual axle 8-bolt | Dual axle 8-bolt |
|
Wing tires
|
N/A | N/A | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires | 305/70 R22.5 Recapped Truck Tires |
|
Gauge wheel mounting
|
N/A | N/A | Single Fixed Gauge Wheels per Wing | Single Fixed Gauge Wheels per Wing | Single Fixed Gauge Wheels per Wing | Single Fixed Gauge Wheels per Wing | Single Fixed Gauge Wheels per Wing | Single Fixed Gauge Wheels per Wing |
|
Guage wheel tires
|
N/A | N/A | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires | 245/70 R19.5 Recapped Truck Tires |
Hitch
|
Hookup to tractor, mounted or pull-type
|
Category 3 or Category 4 hitch | Category 3 or Category 4 hitch | Category 3 or Category 4 hitch | Category 3 or Category 4 hitch | Category 3 or Category 4 hitch | Category 3 or Category 4 hitch | Category 3 or Category 4 hitch | Category 3 or Category 4 hitch |
Depth and Level Adjustment
|
Typical operating depth, in (mm)
|
3-5 in (56-127 mm) | 3-5 in (56-127 mm) | 3-5 in (56-127 mm) | 3-5 in (56-127 mm) | 3-5 in (56-127 mm) | 3-5 in (56-127 mm) | 3-5 in (56-127 mm) | 3-5 in (56-127 mm) |
|
Operating speed (mph)
|
5.5-9 mph | 5.5-9 mph | 5.5-9 mph | 5.5-9 mph | 5.5-9 mph | 5.5-9 mph | 5.5-9 mph | 5.5-9 mph |
|
Depth control
|
Single point depth control | Single point depth control | Single point depth control | Single point depth control | Single point depth control | Single point depth control | Single point depth control | Single point depth control |
|
Fore/aft leveling
|
Hydraulic fore/aft leveling | Hydraulic fore/aft leveling | Hydraulic fore/aft leveling | Hydraulic fore/aft leveling | Hydraulic fore/aft leveling | Hydraulic fore/aft leveling | Hydraulic fore/aft leveling | Hydraulic fore/aft leveling |
Tractor Requirements
|
Required power, hp/ft (kw/m)
|
15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) | 15-20 hp/ft (37-49 kW/m) |
|
Remote Hydraulic Values required
|
3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) | 3 (up to 5 with hydraulic options) |
|
Hydraulic Pressure
|
- | - | - | - | - | - | - | - |
Finishing Attachment Options
|
Option 1
|
3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine | 3 Bar 1/2 in Coil Tine |
|
Option 2
|
Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | Manual 3 Bar 12in Coil Tine with 14 in Single Roller | Manual 3 Bar 12 in Coil Tine with 14 in Single Roller |
|
Option 3
|
Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller | Manual Coil Tine with Hydraulic Lift Roller |
|
Option 4
|
Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller | Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller |
Compare
Select up to 3 products to compare specifications
5200 Enforcer Models
Add Model & Size
Choose Model & SizeProduct Specs
|
Series
|
Salford Tillage | |||
|
Product Type
|
5200 Enforcer | |||
|
Model
|
5200 | |||
|
Size
|
12 ft | |||
|
Folding (Multi-Section) or Non-Folding
|
Non Folding | |||
|
Fold Type
|
N/A |
Dimensions and Weights
|
Working width, ft (m)
|
12 ft 1 in (3.68 m) | |||
|
Transport width, ft (m)
|
13 ft 10 in (4.22 m) | |||
|
Transport height, ft (m)
|
N/A | |||
|
Approximate weight, lb (kg) (w/ Standard harrows unless stated otherwise)
|
13,500 lbs (6,123 kg) | |||
|
Other sizes available, number of widths
|
16ft, 19ft, 22ft, 25ft, 29ft, 36ft, 39ft |
Ground Engaging Equipment - Front Row(s)
|
Front row(s) ground engaging equipment (description)
|
5 bolt concave blade | |||
|
Front row(s) ground engaging equipment (quantity)
|
3 | |||
|
Front row(s) equipment quantity
|
21 | |||
|
Front row(s) equipment mount
|
Rubber V-Wedge Suspension w/ V-Bolt Mount | |||
|
Equipment spacing, in (mm)
|
5 in (127 mm) | |||
|
Equipment size, in (mm)
|
22 in (559 mm) [Optional: 24 in (609 mm)] | |||
|
Angle
|
Double compound angle | |||
|
Bearings
|
Double Tapered Roller Bearing |
Ground Engaging Equipment - Rear Row(s)
|
Rear row(s) ground engaging equipment (description)
|
5 bolt concave blade | |||
|
Rear row(s) ground engaging equipment (quantity)
|
1 | |||
|
Rear row(s) equipment quantity
|
7 | |||
|
Rear row(s) equipment mount
|
Rubber V-Wedge Suspension w/ V-Bolt Mount | |||
|
Equipment spacing, in (mm)
|
5 in (127 mm) | |||
|
Equipment size, in (mm)
|
22 in (559 mm) [Optional: 24 in (609 mm)] | |||
|
Angle
|
Single compound angle | |||
|
Bearings
|
Double Tapered Roller Bearing | |||
|
Equipment options
|
- |
Wheels and Tires
|
Transport wheel mounting
|
Dual axle 8-bolt | |||
|
Transport tires
|
305/70 R22.5 Recapped Truck Tires | |||
|
Wing wheel mounting
|
N/A | |||
|
Wing tires
|
N/A | |||
|
Gauge wheel mounting
|
N/A | |||
|
Guage wheel tires
|
N/A |
Hitch
|
Hookup to tractor, mounted or pull-type
|
Category 3 or Category 4 hitch |
Depth and Level Adjustment
|
Typical operating depth, in (mm)
|
3-5 in (56-127 mm) | |||
|
Operating speed (mph)
|
5.5-9 mph | |||
|
Depth control
|
Single point depth control | |||
|
Fore/aft leveling
|
Hydraulic fore/aft leveling |
Tractor Requirements
|
Required power, hp/ft (kw/m)
|
15-20 hp/ft (37-49 kW/m) | |||
|
Remote Hydraulic Values required
|
3 (up to 5 with hydraulic options) | |||
|
Hydraulic Pressure
|
- |
Finishing Attachment Options
|
Option 1
|
3 Bar 1/2 in Coil Tine | |||
|
Option 2
|
Manual 3 Bar 12 in Coil Tine with 14 in Single Roller | |||
|
Option 3
|
Manual Coil Tine with Hydraulic Lift Roller | |||
|
Option 4
|
Hydraulic Adjust Coil Tine with Hydraulic Lift Single 14 in Roller |
Explore More
Testimonials
Tillage
•
5200 Enforcer
•
Tillage
•
Fall Tillage
•
Seedbed Preparation
•
Vertical Tillage
Downloads
5200 Enforcer Literature
English
5200 Enforcer Literature
French
Get Financing
